Menu

DELTA4000 series

12 kV insulation diagnostic system

  • Immediate power frequency (50/60 Hz) insulation condition assessment with 1 Hz power factor/tan delta
  • Precise temperature correction based on insulation deterioration with patented Individual Temperature Correction (ITC)
  • Guided test forms streamline testing and condition assessment of critical high voltage assets
  • Simplified connection to bushing taps using quick disconnect clamps and 4 mm banana plug sockets
  • Portable, lightweight, and rugged two-piece design
  • Accurate measurements under high noise conditions (765 kV substations)
  • Industrial 300 mm (12 in) touch screen controller option

The DELTA4000 is an automatic 12 kV insulation power factor/tan delta test set designed for the immediate condition assessment of electrical insulation. In addition to traditional power frequency (50/60 Hz) testing, the DELTA4000 uses 1 Hz power factor/tan delta to enhance power frequency assessment of high voltage transformers, bushings, circuit breakers, cables, lightning arresters, and rotating machines. Using the same connection and software as power frequency tests, 1 Hz improves maintenance planning by reducing the need for historical trending and proprietary databases.

Two configurations make up the series:

  • DELTA4110 - comes with an external computer (not included) and consists of the DELTA4100 control unit and DELTA4010 high voltage unit
  • DELTA4310A - comes with a touch screen display interface and an on-board computer, PowerDB software, and printer. It allows you to connect to and control the MWA300, TTR300/310E, MTO300, MLR10, and some Megger insulation resistance instruments

The high power variable frequency design generates its own test signal independent of line frequency quality, and the hardware design uses the latest technology available for digital filtering of the response signal. As a result, the DELTA4000 series produces reliable results and stable readings in the shortest time with the highest accuracy, even in high interference substations.

The DELTA4000 series operates with PowerDB software for automatic testing and reporting or with Delta Control software for real-time manual testing.

Measurements include voltage, current, power (loss), power factor/tan delta, inductance, power factor, and capacitance. The test results are automatically stored in the computer and can also be downloaded directly to a USB drive or a printer.

Technical Documents
Technical guide
A Guide to Transformer Ratio Measurements
Technical guide
Case study: Identifying aging and installation issues in an HV bushing
Technical guide
Case study: NB DFR on HV CVTs
Technical guide
DELTA4000 12 kV insulation diagnostic system application guide
Transformer Test Instrument Software Updates for TTR330A, MTO330A, MWA330A, DELTA4310A

The following components have been updated:

PowerDB ________________ V11.2.10 

MTOTestXP ______________ 2019.12.03.1

Delta Manual Control ______________ 2.0.9.51.0   

Instrument Config ______ 1.0.20023.1919

Splash Screen __________ 1.0.21075.830

Factory Config _________ 1.0.21122.850

Megger Update Manager __ 1.0.21165.1032

 

Recommendations

- Megger recommends that you return your instrument annually for calibration verification.
- Any instrument returned for re-calibration will be updated with the latest firmware and software versions.
- Certified Factory Calibration is valid for one year.

Attention

Incorrect installation of updates or incomplete updates may cause the equipment to become unusable.

If damage occurs from improper updates, the customer may be responsible for repair costs.

Software updates for TTR330A, MTO330A, MWA330A and DELTA4310A

Download this zip file, extract, and run the executable.

 

256bit Hash:
be0628b2014fffeca839036dae42c3d1a6c5c73d79a2e5f2fc6d0716667ef9d3

 

XfmrFamUpdater_10.005_fi3.zip

763 MB | 02/08/2022

XfmrFamUpdater_10-005_fi3.zip
745.9 MB | 06/05/23
Update Instructions

Please download and read these instructions before performing the update.

 

InstrumentUpdateInstructions_r10.pdf
623.9 KB | 06/05/23
DELTA41XX series firmware and software updates

The Megger Valley Forge, USA factory and select Megger Authorized Service Centers (ASCs) can perform updates. If you do not feel capable of performing updates properly, please contact your nearest Megger sales representative for information on where to return your instrument for updates.


Carefully read all instructions and backup your data before performing any updates.

Only update the firmware or software if you are experiencing difficulty with your instrument or if you have a specific need to do so.

!! WARNING !!

Incorrect installation of updates and incomplete updates may cause an error and make the equipment unusable.

If damage occurs from improper updates, customer is responsible for repair costs.

 

Download Delta Control 2.0.9.51.0 Installer
DELTAControlInstall_v2-0-9-51-0.exe
25.9 MB | 09/08/22
DELTA43XX series firmware and software updates

The Megger Valley Forge, USA factory and select Megger Authorized Service Centers (ASCs) can perform updates. If you do not feel capable of performing updates properly, please contact your nearest Megger sales representative for information on where to return your instrument for updates.


Carefully read all instructions and backup your data before performing any updates.

Only update the firmware or software if you are experiencing difficulty with your instrument or if you have a specific need to do so.

!! WARNING !!

Incorrect installation of updates and incomplete updates may cause an error and make the equipment unusable.

If damage occurs from improper updates, customer is responsible for repair costs.