Socket tester

  • Simple and effective identification of faulty wiring at sockets
  • Easy to use
  • 2 green and 1 red LED’s for instant error reporting and fault diagnosis
  • Identifies 17 missing wire and wrong connection combinations
  • Rugged and reliable

The Megger MST210 Socket Tester is a convenient, compact plug-in style tester designed to identify wiring faults at UK 13 A 3-pin power sockets. Over 17 combinations of wiring fault can be identified including missing wires and incorrect or reversed connections.

Faults are signalled by 3 bright LED’s on the front of the unit, with a simple diagnosis chart for typical errors included on the label next to the LED’s. 2 green LED’s signal a correctly wired socket, and a third red LED identifies a fault. If either green LED fails to light, or the red LED comes on, a fault is present and will require further investigation.

The MST210 is ideal for the initial identification of socket faults following socket replacement or re-wire work of any kind. Simple miss-wires or missing connections can be quickly identified prior to full BS7671 electrical test and inspection, so time is saved during the testing and certification process.