Menu
Support
Technical library

Technical library

The Megger technical library provides access to a range of additional content and resources such as technical guides, application notes and more. Use the filters to browse specific content (e.g. application notes) or refine your search to a particular electrical application area. 

 

If you would like to see the content we have available on a particular subject or need to locate some software, simply enter a search below. Please note, you will need to create an account to access some resources.

Filter by application type:
    Showing item(s) 91 - 100 of 457 in total
PowerDB auto limits
Power DB can now automatically set your battery limits based on the type of battery being tested. Simply select the battery type and let Power DB set the limits.
Published: 24 February 2020
Download PDF
TTRU3 Calibration verification
When performing calibration verification of the TTRU3, the following factors need to be considered to achieve accurate measurements and prevent damage to your calibration fixture or TTRU3.
Published: 20 February 2020
Download PDF
TTRU3 2.2.4
TTRU3 Software
Published: 17 February 2020
Download
UPS noise detection using BITE3 and MPQ1000
Not all product demonstrations go as planned. Unforeseen problems can arise, causing the demonstration to go awry. We can either accept this as a failure or use it to create an opportunity. 
Published: 5 February 2020
Download PDF
MeggerBook Cable & MeggerBook Report Edition
MeggerBook Cable & Report Edition
Published: 4 February 2020
Download
Cable Analysis Software (CAS-1)
Software download files for CAS-1
Published: 22 January 2020
Download
Working with fault monitors
A look at testing DC bus systems using the BGL/BGFT.
Published: 1 January 2020
Download PDF
Transformer Tap Changer Testing
This application note describes tap changer testing in general and details on how to use the capabilities inMTO210, 300 and 330 for tap changer measurements. It is not replacing the MTO user manuals where generaloperation of the instrument and connection schemes for various transformers is described.
Published: 11 December 2019
Download PDF
BITE3 Spectrum analyzer
The BITE3 battery impedance tester comes standard with a built in spectrum analyzer. The spectrum analyzer gives the user the ability to examine the frequency content of the ripple current on their batteries. By examining the ripple frequency the health of the charger can be verified.
Published: 11 December 2019
Download PDF
Parallel battery strings
Performing ohmic testing on parallel strings:  Parallel strings present a challenge when performing ohmic testing. This is because a parallel battery string has multiple paths for the test current to flow. In a series string the injected test current only has one path, through the battery under test. Since the all the test current goes through the battery under test a proper repeatable measurement is made.
Published: 11 December 2019
Download PDF
  • <
  • ...
  • 6
  • 7
  • 8
  • 9
  • 10
  • ...
  • >
  • Showing item(s) 91 - 100 of 457 in total